Remote FortiDevice






The Remote FortiDevice has been specially designed for a cost-effective VPN connection for a home office workplace. The great advantage of this solution is the possibility of handling the central management via a FortiGate and thus managing your WLAN infrastructure via it. The unit has four internal antennas.
The connection to a FortiGate can be established with AES256Bit encryption via the IPSec protocol. This means that the connection is not only secure, but can also be processed hardware-accelerated by the FortiGate using the Fortinet Content Processor (CP). Thus, a real VPN throughput rate of up to 20 MBit/s can be achieved. An option for so-called split-tunnelling, i.e. splitting the data traffic between the VPN connection to the company network and directly to the Internet, is also possible.
No additional licensing is required for setting up a WLAN network or operating the VPN connection. This means that only the purchase costs are incurred. However, we recommend a FortiCare support licence for the FortiGate firewall in order to receive support from the manufacturer and firmware updates.
The access point is designed to be mounted on a wall; a stand is optionally available on request for installation on a desk.
Prerequisites |
---|
FortiGate at the main location |
FortiGate accessible via the Internet |
Internet connection at the home office workplace |
What does our service offer you?
We advise you and accompany you, from planning to execution.
We offer certified technicians with expertise who not only set up the solution for you, but also explain how you can manage your solution yourself - for example, to connect additional access points.
We do this by remotely creating a configuration on your FortiGate firewall that enables zero-touch deployment of the remote FortiDevice. This means that an administrator or technician does not have to hold the device in their hands at any time. For example, it can be delivered directly to an employee. The employee only has to connect the device. The access point then connects to the FortiGate independently and thus establishes the encrypted connection to the company network.
Your advantages at a glance | |
---|---|
DTLS or IPSec encryption | ✔ |
WLAN included | ✔ |
No licence fee | ✔ |
Operation via PoE possible | ✔ |
IP phone can be operated via PoE-PD | ✔ |
Product information
Antennas: | 5 Internal + 1 BLE |
---|---|
Assembly: | Ceiling , T-rail , Wall |
Environment: | Indoor |
Frequency: | 2,4 GHz & 5 GHz |
Maximum Throughput 2.4 GHz: | 574 Mbps |
Maximum Throughput 5 GHz: | 1,2 Gbps |
Radios: | 3 + 1 BLE |
802.11: | a, b, g, n, ac W2, ax |
MIMO: | 2x2:2 MU MIMO |
0 of 0 reviews
Login
Zubehör
This is a Gigabit Power over Ethernet Injector 1-Port 802.3af 15.4W for the Fortinet Access Points.
This is a Gigabit Power over Ethernet Injector 1-Port 802.3at 30W for the Fortinet Access Points.
The ZyXEL Power Injector with Gigabit LAN - RJ-45 interface and LED indicator is used to supply power to all PoE-capable devices that support PoE 802.3af or PoE+ 802.3at.
With this device, you can cost-effectively supply individual PoE-capable devices with both data and power using just one cable. Since the injector is Gigabit Ethernet capable, there are also no problems with speed.
Customers have also seen
The FortiGate 600F Series provides a scalable and secure SD-WAN solution with Next Generation Firewall (NGFW) capabilities for medium to large enterprises deployed on campus or in branch offices. It protects against cyber threats with SoC acceleration and industry-leading SD-WAN in one. Fortinet's Security-Driven Networking approach provides tight integration of the network into the new generation of security.
The FortiGate 70F Series provides a fast and secure next-generation firewall and SD-WAN solution in a compact fanless desktop form factor for branch offices and midsize businesses. It protects against cyber threats with SoC acceleration and industry-leading SD-WAN in a simple, affordable and easy-to-deploy solution. Fortinet's Security-Driven Networking approach tightly integrates the network with the new generation of security.
The Sophos Switch CS110-48 is a switch with 48x GE ports (802.3af/802.3at). It also has 4 x 1G/10G SFP+ ports. Additionally, there are variants with PoE. The CS110-48P delivers a PoE budget of up to 410 watts on 48 ports, while the CS110-48FP delivers up to 740 watts on 48 ports.
The Sophos APX 530 access point with 3x3:3 MU-MIMO is highly flexible and suitable for medium density environments and devices with high bandwidth requirements.
The device has internal antennas, three 2.4GHz antennas and three 5GHz antennas. An additional antenna provides support for Bluetooth Low Energy (BLE).
Thanks to the Wave 2 standard, the access point is twice as fast as the Sophos AP100, with up to 2.6 gigabits per second.
Power can be supplied either via a power adapter or via PoE+ (Power over Ethernet). The device requires up to 16.7 watts of power.
You can conveniently manage the devices via Sophos Central Wireless. Since November 2018, you can also manage the new access points via the Sophox XG series firewalls. Support for the SG series has been available since UTM 9.7, which was released at the end of September 2019.
Signal strength of the Sophos APX530 in various scenarios (ceiling-mounted)
***These graphics show the propagation of the signal strength within the framework of standardised attenuation values for walls and sources of interference according to the respective material properties. Deviations in signal propagation are possible depending on the building material.
The H550 is the perfect choice for providing multiple services in hospitality and residential environments, such as hotel guest rooms, dormitories, flats and other building complexes. It can connect wired network devices such as IPTV set-top boxes, IP phones or networked mini-bars, while offering dual-band Wi-Fi 6 coverage as well as Zigbee and Bluetooth Low Energy (BLE). As a result, the H550 supports a wide range of IoT endpoints, minimising the need for standalone IoT networks and simplifying the deployment of IoT solutions.
A PoE port and pass-through features allow devices to be connected and powered directly through the wall switch. An integrated cable channel can even be used to connect legacy devices such as digital phones that require native access to PBX systems. All of these in-room services can co-exist in the same junction box, dramatically reducing cabling, installation time and construction costs.
The H550 wall-mounted Wi-Fi 6 AP incorporates patented technologies found only in the RuckusWi-Fi portfolio:
- - Expand coverage with patented BeamFlex+, which uses multi-directional antenna profiles.
- - Improve throughput with ChannelFly, which dynamically scans for free or underutilised Wi-Fi channels to use.
- - Maximise the reliability of video and IP-based voice communications over Wi-Fi networks with the SmartCast traffic prioritisation engine.
With multi-user MIMO connectivity, the H550 can transmit and receive simultaneously from multiple Wi-Fi 6 clients, improving network radio transmission and overall performance, even for non-Wi-Fi 6 clients. The H550 also features a USB port to support future add-on radios, easy-to-implement mesh networking capabilities and support for up to 100 clients per room. Whether you deploy ten or ten thousand APs, the H550 is easy to manage via Ruckus' controller-less, appliance, virtual and cloud management options.
Signal strength of the Ruckus H550 in different scenarios (Ceiling mounting)
***These graphics show the propagation of the signal strength within the framework of standardized attenuation values for walls and interference sources according to the respective material properties. Deviations in the signal propagation are possible depending on the building substance.
FortiCare Premium Support
FortiCare Premium covers the same features as the former FortiCare Support. FortiCare Premium is therefore suitable for devices that require a 24x7x365 response within one hour for both critical and non-critical issues.
With FortiCare Premium Support, you get world-class vendor support for your Fortinet solutions. An ongoing FortiCare license allows you to install firmware updates for your Fortinet appliance directly from the device. Fortinet provides technical support and return merchandise (RMA) services on an appliance-by-appliance basis with FortiCare for 24x7 support and timely problem resolution. FortiCare services support the entire Fortinet Security Fabric, enabling you to resolve diverse cross-product issues with a single solution. Flexible support options help your organization maximize uptime, security, and performance based on your business needs.
On request, we can also offer you FortiCare Essentials or FortiCare Elite. The features of the respective licenses can be found in the table below.
FortiCare Essential
FortiCare Essentials is the base-level service, which is specifically suited for units that require only a limited amount of support and can accept one business day response time for both critical and non-critical issues. This service is available only for FortiGate models 8x and below and for lower-end FortiWifi units.
FortiCare Elite
FortiCare Elite Services offers extended service level agreements (SLAs) and accelerated problem resolution. This enhanced support offering provides access to a dedicated support team. Ticket handling by a team of technical experts streamlines the solution. This option also provides extended End-of-Engineering Support (EoEs) of 18 months for added flexibility and access to the new FortiCare Elite Portal. This intuitive portal provides a single, unified view of device and security health.
FortiCare Included Features | Per-device Service Optionen | ||
---|---|---|---|
FortiCare | FortiCare | FortiCare | |
Hardware replacement (RMA) | Return and replacement only | Extended replacement (PRMA available) | Extended replacement (PRMA available) |
Web Support | ✓ | ✓ | ✓ |
Telephone Support | - | ✓ | ✓ |
Firmware Updates | ✓ | ✓ | ✓ |
Asset Management Portal | ✓ | ✓ | ✓ |
Response time (critical issue) | Next business day | One hour | 15 minutes |
Response time (non critical issue) | Next business day | Next business day | 2 hours |
Extended End-of-Engineering-Support (E-EoES) for Long Term Supported Firmware (LTS about 18 months) | - | - | ✓ |
Portal for device insights and monitoring | - | - | ✓ |
The FortiGate 40F Series offers a fast and secure SD-WAN solution in a compact fanless desktop form factor for enterprise branch offices and mid-sized businesses. It protects against cyber threats with system-on-a-chip acceleration and industry-leading secure SD-WAN. The FG-40F is affordable, easy to deploy and integrates securely with new-generation cyber security managed networks.
A listing of the available port modules from the XG/SG 2xx/3xx/4xx-er devices:
- 8x 1GbE RJ45
- 8x 1GbE SFP
- 2x 10GbE SFP+
- 4x 1GbE RJ45 -. 2 bypass group
- 4x 10GbE SFP+
- 2x 40GbE QSFP+
- 4x 1GbE RJ45 PoE + Power Supply Kit
- 8x 1GbE RJ45 PoE + Power Supply Kit
Your provider is offering you new and faster DSL rates with speeds of up to 1000 MBit/s? If so, these are usually connections with so-called Supervectoring Profile 35b, a new DSL technology that enables high bandwidths by using highly efficient vectoring techniques and an expansion of the frequency spectrum. In order to be able to use these, however, high-quality hardware is required.
With the further development of highly efficient vectoring techniques and an expansion of the frequency spectrum, higher bandwidths are made possible by means of G.Fast technology. However, in order to be able to use these, high-quality hardware is required that has corresponding hardware chipsets.
The Vigor167 serves VDSL/supervectoring/G.Fast connections.
Please note additionally that due to the discontinuation of ADSL support on the Vigor167, there is now no longer a separate Annex-A and Annex-B variant, as this only affected ADSL spectrums.
On delivery, the Vigor167 is a pure modem. If desired, the administrator can reconfigure the device, within the web interface, as a router. Here, the Vigor166 then has an integrated SPI firewall, port forwarding, DHCP server and other features.
.
The FortiGate 60F offers next-generation firewall features thanks to its high performance, security efficiency and transparency and is ideally suited for small to medium-sized businesses. Depending on licensing, the devices provide you with reliable and comprehensive protection against cyber threats and lay the perfect foundation for maximum security of your network.
The FortiGate 60F uses the industry's first SoC4 SD-WAN ASIC, which provides the industry's fastest application identification and control for more than 5,000 applications. This allows users to avoid delays in accessing their applications and accelerate overlay performance by providing low latency and the best possible user experience for business-critical applications.
FortiGate 60F FAQ
How to create a FortiGate 60F Backup Config?
In the unlikely event that a FortiGate 60F firmware update destroys your configuration, you should always have a backup on hand. You can find out how and where to create or find this backup here.
Where can I find a FortiGate 60F Demo?
Fortinet has provided a demo of the FortiGate user interface in read mode, you can find it here. If you would like to test the device productively in your network, you are welcome to send us a request for a trial.
What are the FortiGate 60F A & B ports?
The so-called FortiLink ports allow to manage connected FortiSwitches directly via the FortiGate. Which models are supported as well as the configuration itself can be found here.
What is the difference between the FortiGate 60F and the FortiGate 61F?
The difference between the two units is only the internal memory, which is built into the FortiGate 61F. Until the FortiGate D series, hard drives were installed as standard. However, these were not needed by all users, so the units have now been split into two different versions. You can use the hard disk for persistent storage of log and quarantine files.
The FortiGate 60F offers next-generation firewall features thanks to its high performance, security efficiency and transparency and is ideally suited for small to medium-sized businesses. Depending on licensing, the devices provide you with reliable and comprehensive protection against cyber threats and lay the perfect foundation for maximum security of your network.
The FortiGate 60F uses the industry's first SoC4 SD-WAN ASIC, which provides the industry's fastest application identification and control for more than 5,000 applications. This allows users to avoid delays in accessing their applications and accelerate overlay performance by providing low latency and the best possible user experience for business-critical applications.
FortiGate 60F FAQ
How to create a FortiGate 60F Backup Config?
In the unlikely event that a FortiGate 60F firmware update destroys your configuration, you should always have a backup on hand. You can find out how and where to create or find this backup here.
Where can I find a FortiGate 60F Demo?
Fortinet has provided a demo of the FortiGate user interface in read mode, you can find it here. If you would like to test the device productively in your network, you are welcome to send us a request for a trial.
What are the FortiGate 60F A & B ports?
The so-called FortiLink ports allow to manage connected FortiSwitches directly via the FortiGate. Which models are supported as well as the configuration itself can be found here.
What is the difference between the FortiGate 60F and the FortiGate 61F?
The difference between the two units is only the internal memory, which is built into the FortiGate 61F. Until the FortiGate D series, hard drives were installed as standard. However, these were not needed by all users, so the units have now been split into two different versions. You can use the hard disk for persistent storage of log and quarantine files.
The FortiGate 100F/101F series offers next-generation firewall features thanks to its high performance, security efficiency and transparency and is ideally suited for small to medium-sized businesses. Thanks to the 2 x 10 GE SFP+, the firewall is also equipped for high demands. Depending on licensing, the devices provide you with reliable and comprehensive protection against cyber threats and lay the perfect foundation for maximum security of your network.
The FortiGate 100F uses the industry's first SoC4 SD-WAN ASIC, which offers the industry's fastest application identification and control for more than 5,000 applications. This enables users to avoid delays in accessing their applications and accelerates overlay performance by providing low latency and the best possible user experience for business-critical applications.
FortiGate 100F FAQ
Offer the FortiGate 100F LACP or Link Aggregation?
Link aggregation is a bundling of several ports/cables to a virtual link/interface. The FortiGate 100F supports link aggregation, both redundant ports or LACP via 802.3ad can be used. The feature is called Virtual Wire Pair.
How to perform a FortiGate 100F firmware update?
You perform a firmware update by clicking on the "Firmware" tab under "System". From there, the rest of the procedure is self-explanatory. Firmware updates are only available if you have a valid FortiCare Support license. This is activated for 90 days with the purchase of FortiGate hardware.
Provides the FortiGate 100F SD-WAN functionality?
SD-WAN bundles the WAN connections into a single interface. This is managed individually, removing much of the effort involved in configuring two or more WAN connections. You can find instructions for configuring the SD-WAN here.
The FortiSwitch-148F is a Layer 2 switch with 48x GE RJ45 and 4x 10GE SFP+ ports. Additionally there are variants with PoE. The FortiSwitch 148F-POE delivers a PoE budget of up to 370 watts on 24 ports, the FortiSwitch 148F-FPOE up to 740 watts on 48 ports. The switch is suitable for medium to large sites or extensions.
Please make sure to order the correct variant when selecting.
FortiSwitch Secure Access Switches provide a simple and scalable Ethernet solution with outstanding security, performance and manageability for small and medium-sized businesses, distributed enterprises and branch offices. FortiSwitch Secure Access Switches are tightly integrated with the FortiGate® Network Security Platform and can be managed directly through the familiar FortiGate interface. This centralized management provides complete visibility and control of all users and devices on the network, regardless of how they connect.
Security Fabric Integration
Reduces complexity and lowers management costs with network security features managed through FortiGate from a single console. This integration allows all users to be authenticated through the same user database, regardless of whether they connect to the wired or wireless network, including temporary guest users. In addition, the same security policy can apply to a user or device regardless of how or where they connect to the network.
Simplifying network deployment
Power over Ethernet (PoE) capability in some models enables easy installation of wireless access points and IP phones on the network.
The FortiGate 40F Series offers a fast and secure SD-WAN solution in a compact fanless desktop form factor for enterprise branch offices and mid-sized businesses. It protects against cyber threats with system-on-a-chip acceleration and industry-leading secure SD-WAN. The FG-40F is affordable, easy to deploy and integrates securely with new-generation cyber security managed networks.
The Greenbone GSM 35 Scan Sensor is designed for scans of up to 300 IPs within 24 hours. It requires a Greenbone Security Manager GSM 400 or higher as master. Thanks to the intuitive setup wizard, the GSM 35 is ready for use in 10 minutes.
The Sophos SG 135 is designed for small businesses or remote offices with up to 35 employees and offers excellent value for money. It is available with or without an integrated WLAN module. This gives you an all-in-one network security and hotspot solution without the need to purchase additional hardware. Of course, you can also add external access points. The SG 105 to SG 135 models are based on Intel multi-core technology, designed for optimal performance and efficiency in a small form factor. You can choose between the more affordable BasicGuard Subscription, where you select software modules as needed, or the FullGuard Subscription, which already includes a full range of security features.
The FortiGate 40F Series offers a fast and secure SD-WAN solution in a compact fanless desktop form factor for enterprise branch offices and mid-sized businesses. It protects against cyber threats with system-on-a-chip acceleration and industry-leading secure SD-WAN. The FG-40F is affordable, easy to deploy and integrates securely with new-generation cyber security managed networks.
The FortiGate 40F Series offers a fast and secure SD-WAN solution in a compact fanless desktop form factor for enterprise branch offices and mid-sized businesses. It protects against cyber threats with system-on-a-chip acceleration and industry-leading secure SD-WAN. The FG-40F is affordable, easy to deploy and integrates securely with new-generation cyber security managed networks.
The Sophos SG 105 is designed for small businesses or remote offices with up to 5 employees and offers excellent value for money. It is available with or without an integrated Wifi module. This gives you an all-in-one network security and hotspot solution without having to purchase additional hardware. Of course, you can also add external access points. The SG 105 to SG 135 models are based on Intel multi-core technology, which is designed for optimum performance and efficiency in a small form factor. You have the choice between the cheaper BasicGuard Subscription, where you select the software modules as required, or the FullGuard Subscription, which already includes a complete range of security functions.
The powerful XGS 126 firewall appliances offer at a desktop form factor and a very good price-performance ratio. If you need to protect a small business or remote offices with up to 20 employees, or have a limited budget, these models are the ideal choice. Models are also available with integrated 802.11ac WLAN for optimal coverage and connectivity for your mobile workforce. Our software is based on the most advanced architecture and makes the most of multi-core technology to deliver excellent throughput rates for your key processes. These models ship with integrated 8GbE copper ports and 2-SFP fiber ports.
The FortiGate 60F offers next-generation firewall features thanks to its high performance, security efficiency and transparency and is ideally suited for small to medium-sized businesses. Depending on licensing, the devices provide you with reliable and comprehensive protection against cyber threats and lay the perfect foundation for maximum security of your network.
The FortiGate 60F uses the industry's first SoC4 SD-WAN ASIC, which provides the industry's fastest application identification and control for more than 5,000 applications. This allows users to avoid delays in accessing their applications and accelerate overlay performance by providing low latency and the best possible user experience for business-critical applications.
FortiGate 60F FAQ
How to create a FortiGate 60F Backup Config?
In the unlikely event that a FortiGate 60F firmware update destroys your configuration, you should always have a backup on hand. You can find out how and where to create or find this backup here.
Where can I find a FortiGate 60F Demo?
Fortinet has provided a demo of the FortiGate user interface in read mode, you can find it here. If you would like to test the device productively in your network, you are welcome to send us a request for a trial.
What are the FortiGate 60F A & B ports?
The so-called FortiLink ports allow to manage connected FortiSwitches directly via the FortiGate. Which models are supported as well as the configuration itself can be found here.
What is the difference between the FortiGate 60F and the FortiGate 61F?
The difference between the two units is only the internal memory, which is built into the FortiGate 61F. Until the FortiGate D series, hard drives were installed as standard. However, these were not needed by all users, so the units have now been split into two different versions. You can use the hard disk for persistent storage of log and quarantine files.
The XGS 87 entry-level desktop firewalls are the ideal choice for price-conscious small businesses, retail and small offices or home offices with up to 5 employees. They are available with and without integrated WLAN. This gives you an all-in-one network security and hotspot solution without the need to purchase additional hardware. Thanks to dual-core technology, the firewalls are highly efficient. Their fanless design ensures that you can work in peace in your office.
If the product is not marked as "available", you will receive more information about the availability of your desired components on request.
Questions to the product?
only €647.20*
Gross price: | €770.17 |
Product number: | ENBIT-RFD |
- Available in 1 day, delivery time 1-3 days
Directly order accessories
Questions to the product?
- From the 1st order - purchase on invoice
- Thanks to SSL Encryption
- +49 228 - 338889-0
- Both our consultants and our technicians are certified by the manufacturer.
- Our company is certified according to ISO 9001. This guarantees, among other things, a smooth process.
- Our company is certified according to ISO 27001. Among other things, this guarantees secure handling of your data.
- Read our reviews.