Sophos XG 17.5 Control Center - Active Firewall, Reports, Messages and Connections & Interfaces
Sophos
The Active Firewall Rules display area shows information that allows the administrator to visualise and evaluate (in terms of data volume) the firewall rules configured on the appliance. Using this information, the administrator can further customise the deployed firewall rules to troubleshoot or increase network performance. All active firewall rules are displayed, regardless of the permissions associated with the logged-in administrator profile.
Types of Firewall Rules
The widget displays the number of firewall rules used to process network traffic. The following types of rules are distinguished:
- Business - Shows the number of active business application firewall rules.
- User - Displays the number of active user application firewall rules.
- Network - Shows the number of active network firewall rules.
Total - Displays the total number of active firewall rules.
The chart provides information about the volume of data (in bytes) processed by each type of active firewall rule in the last 24 hours. Move the mouse over the corresponding chart area to display the volume of data processed by active firewall rule types. The type of firewall rule can be recognised by the following legend:
Company - shown as a green area in the diagram.
User - shown as red area in the diagram
Network - shown as a blue area in the diagram.
Using the information in the respective diagram area, you can determine the saturation level of the network and which type of firewall rule is responsible for this.
Status of firewall rules
The widget also displays the number of firewall rules with their current status. This information is mainly for administration purposes and is useful when several administrators are working on the same appliance. The current status information is based on the following categories or filters:
- Unused - Displays the number of firewall rules that are not processing traffic. You can revise or delete unused firewall rules.
- Disabled - Shows the number of firewall rules that are configured on the appliance but have been disabled.
- Modified - Displays the number of firewall rules that have been recently updated.
- New - Displays the number of newly created firewall rules.
When you click on a firewall rule type or the status of a firewall rule, you are redirected to the Firewall page, where the relevant firewall rules are displayed.
Reports
Not applicable for - CR10iNG, CR10wiNG, CR15i, CR15wi, CR15iNG, CR15wiNG, CR15iNG-LE, CR15iNG-4P, CR15wiNG-4P, XG85 and XG85w models.
Depending on which modules have been subscribed to, a maximum of five critical reports from the table below are displayed:
| Report name | Number/data displayed | Subscription |
|---|---|---|
| High-risk applications | <Number> of risky applications seen yesterday | Web Protection |
| Questionable websites | <number> of questionable websites seen yesterday | Web Protection |
| Internet users | <Data transfer> (in bytes) used by the top 10 users yesterday | Web Protection |
| Attacks | <number> of attacks that took place yesterday | Network Protection |
| Web Server Protection | <number> of web server attacks yesterday | Web Server Protection |
| Email usage | <data transfer> (in bytes) used | Email Protection |
| Email Protection | <number> of spam emails received yesterday | Email Protection |
| Traffic Dashboard | - | Either Web Protection or Network Protection |
| Security Dashboard | - | Either Web Protection or Network Protection |
Most common malware
Only available on CR15iNG, CR15wiNG, CR15i and CR15wi models
Displays the top five malicious programmes found by XG Firewall, in addition to the number of detections per malicious programme.
Messages
This section displays information that allows you to monitor and track the appliance's system events. Each notification contains information on the date and time the event occurred.
- The default password for the user "admin" has not been changed. It is strongly recommended to change the password. - This alert message is displayed if the default password for the super administrator has not been changed.
- The default password for the web admin interface has not been changed.
- HTTPS, SSH-based administration is allowed over the WAN. This is not a secure configuration. It is recommended to use a secure password.
- HTTP, Telnet-based management is allowed over the WAN. This is not a secure configuration. It is recommended to use a secure password.
- Your XG Firewall is not registered.
- The modules have expired.
Icons are used for easier identification of notifications.
: Indicates alert messages.
: Alerts
: Notifications for firmware downloads
Connections & Interfaces
The XG Firewall image is displayed in this display area on the right. Multiple XG Firewall appliances are displayed for a virtual appliance.
Interface Table
This table displays information about interfaces with name description, type and status, received and transmitted kBits/s.
- Interface - Shows the name of the interface configured in the machine. Example Port A, Guest AP Displays physical interfaces, LAG and bridge types of interfaces.
- Type - Displays the zone with the type of interface configured. Example Physical LAN, WAN LAN, etc.
- Status - Displays the status and interface speed for the configured interface. The status can be connected, cable removed, connection interrupted, connection being established, enabled or disabled (for RED interface only).
- Received kBit/s - Shows how many bits were received via the interface.
- Sent kBit/s - Shows how many bits were sent via the interface.
Gateway table
This table displays information about gateways that allow you to monitor active and backup gateways. It gives their name, interface, type, IPv4/IPv6, Enable on failover from, weighting and status.
- Gateway Name - Shows the name of the gateway.
- Interface - Displays the name and IP address of the interface.
- Type - Displays the type of gateway in relation to load balancing. Available options are Active and Reserve.
- IPv4/IPv6 - Displays the type of gateway in relation to load sharing. Available options are IPv4 and IPv6.
- Enable on failover from - Indicates the action in case a gateway fails, i.e. whether a backup gateway is enabled or not.
- Weighting - Shows how much traffic is routed through a particular link in relation to the other links.
- Status - Shows the status of the gateway. The status can be Active or Inactive.
Marcel Zimmer is the Technical Managing Director of EnBITCon. During his time in the German Armed Forces, the trained IT developer was able to gain numerous project experiences. His interest in IT security was significantly awakened by his service in command support. Even after his service, he is an active reservist in the Bundeswehr.
His first firewall was a Sophos UTM 120, which he had to set up for a customer project. Since then, his interest in IT security has grown steadily. In the course of time, various security and infrastructure topics have come into his focus. His most interesting projects included, for example, WLAN coverage in an explosion-proof area, as well as a multi-site WLAN solution for a large