FortiOS 6.4.1 - Network Access Control on FortiSwitch
Fortinet
More and more companies are digitalised. Not only large corporations, but also small companies with few employees. Nevertheless, even in small companies there is an obligation to protect the company network, as well as employee and customer data.
Logical segmentation can already help a lot. This allows you to separate networks and assign them to task areas or departments. You can do this manually, or automate it with Network Access Control (NAC) filter rules.
This allows you to conveniently split devices into VLANs automatically, regardless of which port the device is connected to. For example, Voice over IP telephones can be detected directly and automatically assigned to a VLAN. This not only increases security, but also allows you to use separate quality-of-service policies to ensure that the network packets of your IP telephones are given priority. Phone calls can thus take place without unnecessary delay and interruption.
You can either set up NAC rules directly on a FortiSwitch, or centrally configure and monitor all FortiSwitch devices on the network via a central FortiGate firewall.
But what exactly happens when a new device appears on the network?
First of all, the device is placed in a so-called onboarding VLAN. This should have very high security guidelines from the firewall and, if possible, no contact with other end devices in the infrastructure. Devices can then be identified and assigned via this. For example, via a captive portal where a user must identify himself before access to the network is granted.
As soon as the identification is completed, the device is assigned to the corresponding VLAN, depending on the policy.
If you are interested in a Fortinet product and would like advice or even a trial, please feel free to contact us by phone, email or our contact form.